The Profitec Drive is a dual-boiler espresso machine with fast heat-up, PID control, and OLED display, featuring built-in flow control, programmable pre-infusion, and flexible water connection options for maximum performance and convenience.
Menu
Categories
Profitec Ride Espresso Machine
9,500.00
The Profitec Ride Espresso Machine is a dual-boiler system with PID control for precise temperature management, fast heat-up, programmable on/off times, and modular portafilter options, all wrapped in a sleek anthracite and stainless steel design for both performance and style.
Estimated Time of Delivery: you can call our team
Add to basket
-
Dual Boiler System: Simultaneous heating of coffee and steam boilers for rapid steam readiness and stable performance.
-
PID Temperature Control: Individual temperature adjustments for both boilers ensure precise brewing and steaming.
-
Fast Heat-Up Mode: Accelerates the machine's readiness, making it operational more quickly.
-
Profitec ride espresso machine has Programmable On/Off Times: Allows users to set automatic switch-on and switch-off times for convenience.
-
Active & Passive Preinfusion Modes: Enhances espresso extraction by allowing water to evenly saturate the coffee puck before full pressure is applied.
-
OLED Display: Provides real-time information, including shot timer and machine status.
-
Modular Bottomless Portafilter: Can be easily converted with silicone attachments for single or double spouts, facilitating easy and hygienic cleaning.
-
Joystick Valves: Quick steam and hot water joystick valves for efficient operation.
-
No-Burn Steam Wand: Insulated steam wand to prevent burns and ensure safety during use.
-
ECO Mode: Energy-saving mode that reduces power consumption when the machine is idle.
-
Maintenance Reminders: Alerts for brew group cleaning and filter change to ensure optimal performance.
Dimensions
-
Width: 30.5 cm
-
Depth: 45 cm
-
Height: 37 cm
-
Weight: 28 kg
Electrical
-
Voltage: 230 V (EU, UK, CH, AU) / 115 V (US)
-
Power Consumption: 2100 W (EU, UK, CH, AU) / 1700 W (US)
Steam & Brew Systems
-
Coffee Boiler: 0.75 liters (stainless steel)
-
Steam Boiler: 1.0 liter (stainless steel)
-
Heating Elements: Stainless steel heaters
-
Pump Type: Vibration pump
Plumbing
-
Water Reservoir: 2.8 liters (BPA-free plastic)
-
Water Connection: Reservoir only (no direct plumbing)
-
Low Water Sensor: Automatic shut-off when water volume is low
PROFITEC DRIVE
10,856.19
Features
-
Dual Boiler System: Separate stainless steel boilers for espresso brewing (0.75L) and steam production (2.0L) ensure optimal temperature stability and simultaneous operation.
-
Flow Control Valve: Built-in flow profile valve with a visually striking pressure gauge allows for precise control over water flow during extraction, enabling fine-tuning of flavor profiles.
-
PID Temperature Control: Electronic control of both coffee and steam boiler temperatures for precise thermal management.
-
OLED Display: High-resolution display for monitoring and adjusting machine parameters, including temperature, shot timers, and maintenance reminders.
-
Fast Heat-Up Mode: Accelerated warm-up feature reduces waiting time, allowing the machine to be ready for brewing more quickly.
-
Programmable On/Off Times: Allows scheduling of automatic switch-on and switch-off times for convenience and energy savings.
-
Active & Passive Pre-Infusion Modes: Offers customizable pre-infusion settings to achieve the best possible extraction results.
-
Rotary Pump: Provides consistent pressure and allows for both reservoir and direct water line connections.
-
Joystick Valves: Intuitive joystick controls for steam and hot water dispensing enhance user experience.
-
Eco Mode: Programmable standby mode reduces energy consumption during idle periods.
-
Maintenance Reminders: Built-in alerts for brew group cleaning and filter changes ensure optimal performance.
profitec drive Dimensions
-
Width: 34 cm
-
Depth: 48.5 cm (without portafilter), 59 cm (with portafilter)
-
Height: 42 cm
-
Weight: 31 kg
Electrical
-
Voltage: 230V (EU, UK, CH, AU) / 115V (US)
-
Power Consumption: 1600 W
Steam & Brew Systems
-
Coffee Boiler Capacity: 0.75 liters (stainless steel)
-
Steam Boiler Capacity: 2.0 liters (stainless steel)
-
Heating Elements: Stainless steel heaters with PID control
-
Pump Type: Internal rotary pump
Plumbing
-
Water Reservoir: 2.8 liters (removable, BPA-free plastic)
-
Water Connection: Reservoir or direct plumbing with included kit
-
Low Water Sensor: Automatic shut-off when water volume is low
Profitec E61 Flow Profile Valve P1065
825.00
Product Specification
1. Unscrew the mushroom with an open-end wrench sized 36mm across flats, 2. Caution: Be careful to avoid scratches! 3. Screw the new profiling valve P1025 in, at the position of the Mushroom. 4. Unscrew the screw with a 5mm hex key. 5. Mount the pressure gauge P1026 where the hex key screw was inserted. 6. The Teflon seal of the screw has to be reused. 7. It is recommended to use FDA-approved thread sealing too, 8. Caution:Â Do not fasten the gauge to right, to avoid damaging to the thread. 9. Close the valve by rotating the bolt clockwise completely. 10. Place the bushing to point in desired direction for closed position onto spindle. 11. Screw the ball grip in and tighten it. 12. Unscrew the purebred-cylinder at lower brew group with an open-end wrench sized 36mm 13. Exchange the spring to the supplied P1029-spring 14. Insert the valve spindle in the purebred-cylinder, 15. And reassemble it to the lower brew group. 16. Unplug your machine from power supply before assembling the Profitec E61 Flow ValveProfitec E61 Flow Control Device
825.00
flow control e61 Specification
1. Unscrew the mushroom with an open-end wrench sized 36mm across flats, 2. Caution: Be careful to avoid scratches! 3. Screw the new profiling valve P1025 in, at the position of the Mushroom. 4. Unscrew the screw with a 5mm hex key. 5. Mount the pressure gauge P1026 where the hex key screw was inserted. 6. The Teflon seal of the screw has to be reused. 7. It is recommended to use FDA-approved thread sealing too, 8. Caution:Â Do not fasten the gauge to right, to avoid damaging to the thread. 9. Close the valve by rotating the bolt clockwise completely. 10. Place the bushing to point in desired direction for closed position onto spindle. 11. Screw the ball grip in and tighten it. 12. Unscrew the purebred-cylinder at lower brew group with an open-end wrench sized 36mm 13. Exchange the spring to the supplied P1029-spring 14. Insert the valve spindle in the purebred-cylinder, 15. And reassemble it to the lower brew group. 16. Unplug your machine from power supply before assembling the Profitec E61 Flow ValveProfitec Pro 500 PID Espresso Machine
9,333.33
The Profitec Pro 500 PID is a heat-exchanger espresso machine with PID temperature control, allowing simultaneous brewing and steaming, featuring a stainless steel brew group, rotary valves, insulated 2.0L boiler, and durable build—delivering café-quality performance and reliability at home.
 Features
-
Heat Exchanger System: Allows simultaneous brewing and steaming, ensuring efficient drink preparation.
-
PID Temperature Control: Provides precise control over boiler temperature, enhancing espresso extraction and steam performance. MiniPCaffe.com+5iDrinkCoffee+5iDrinkCoffee+5
-
E61 Group Head: Ensures stable temperature and even water distribution, essential for consistent espresso quality.
-
Vibratory Pump: Quiet and reliable, delivering consistent pressure for optimal espresso extraction.
-
No-Burn Steam and Hot Water Wands: Double-walled design prevents burns and makes cleaning easier.
-
Dual Pressure Gauges: Monitor both boiler and pump pressures for better control over the brewing process.
-
Programmable ECO Mode: Allows the machine to enter standby mode after a set period, conserving energy.
-
Stainless Steel Construction: Polished stainless steel body for durability and a sleek appearance.
profitec pro 500 Dimensions
-
Width: 30.5 cm
-
Depth: 45.0 cm
-
Height: 39.5 cm
-
Weight: 23.5 kg
Electrical
-
Voltage: 220–240V / 50–60Hz
-
Power Consumption: 1400 W
Steam & Brew Systems
-
Boiler Capacity: 2.0 liters (stainless steel)
-
Boiler Type: Heat exchanger
-
Pump Type: Vibratory pump
-
Brew Group: E61, 58 mm diameter
Plumbing
-
Water Reservoir Capacity: 2.8 liters
-
Water Connection: Internal reservoir only
-
Low Water Sensor: Automatic shut-off when water volume is low
Profitec Pro 700
11,428.57
The Profitec Pro 700 is a dual-boiler espresso machine with PID control, E61 group, and a rotary pump, delivering precise, café-quality performance with both reservoir and direct plumbing options.
 Features
-
Dual Boiler System: Independent stainless steel boilers for brewing (0.75 L) and steaming (2.0 L) allow simultaneous operation and precise temperature control.
-
PID Temperature Control: Digital PID controller enables precise adjustment of both boiler temperatures and includes a shot timer for consistent results.
-
E61 Brew Group: Classic E61 group head with stainless steel mushroom ensures optimal thermal stability and mechanical pre-infusion.
-
Rotary Pump: Quiet and durable rotary pump provides consistent pressure and allows for direct plumbing or reservoir operation.
-
Switchable Water Source: Easily switch between a 2.8 L internal water reservoir and direct water line connection.
-
Programmable ECO Mode: Energy-saving mode reduces power consumption during periods of inactivity.
-
No-Burn Steam and Hot Water Wands: Insulated wands remain cool to the touch, enhancing safety and ease of cleaning.
-
Large Drip Tray: Spacious drip tray with a 1.0 L capacity minimizes the need for frequent emptying.
Profitec pro 700 Dimensions
-
Width: 340 mm (13.4 inches)
-
Depth: 590 mm (23.2 inches)
-
Height: 420 mm (16.5 inches)
-
Weight: 31 kg (68.4 lbs)
Electrical
-
Voltage: 230V (EU/UK/AU) / 115V (US)
-
Power Consumption: 1600 W
-
Amperage: Approximately 7 A (230V) / 14 A (115V)
-
Plug Type: Standard grounded plug (varies by region)
Steam & Brew Systems
-
Brew Boiler Capacity: 0.75 liters
-
Steam Boiler Capacity: 2.0 liters
-
Boiler Material: Stainless steel
-
Pump Type: Rotary pump
-
Brew Group: E61 group head with stainless steel mushroom
-
Pre-Infusion: Mechanical pre-infusion via E61 group head
-
Steam Wand: No-burn stainless steel steam wand with two-hole tip
-
Hot Water Dispenser: Yes, with no-burn feature
Plumbing
-
Water Source: 2.8 L internal reservoir or direct water line connection
-
Water Connection: Includes braided stainless steel hose with 3/8" BSPT fitting for direct plumbing
-
Drainage: Drip tray for manual emptying; optional plumbed drain connection
For more information, you can contact us on WhatsApp by clicking here
Products
-
2,250.00 -
-
-
-
More
More
